User`s manual

ENDAT-2794A USERS MANUAL
UNICORN COMPUTER CORP.
24
3-1. Standard CMOS Features
The Standard Setup is used for the basic hardware system configuration. The main
function is for Data/Time and Hard Disk Drive settings.
˙Video
Select the type of primary video subsystem.
<Choice: EGA / VGA, CGA 40, CGA 80, MONO>
IDE Channel 0~3 Primary Master/Slaver
Item Optimized defaults
IDE HDD Auto-Detection Press Enter
IDE Channel Auto
Access Mode Auto
˙IDE HDD Auto-Detection
Press <Enter> to auto-detect the parameters of the IDE/SATA device on this
channel. IDE Channel 0, 1, 2, 3 Master/Slave configure your IDE/SATA devices
by using one of the three methods below:
Item Optimized defaults
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master Press Enter
IDE Channel 0 Slave Press Enter
IDE Channel 1 Master Press Enter
IDE Channel 1 Slave Press Enter
IDE Channel 2 Master Press Enter
IDE Channel 3 Master Press Enter
Video EGA/VGA
Halt On All Errors