ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. ENDAT-D2512 User’s Manual For ENDAT-D2512 PCB ver. A2 or later Document version: 1.1 Release Date: Nov.27.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Copyright Notice The content of this manual has been checked for accuracy. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this manual. The manufacturer reserves the right to make improvements or modification to this document and/or the product at any time without prior notice.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Specification: Model System Chipset CPU Supporting Memory Ethernet VGA LVDS interface Dual view Serial/Print RS 422 / 485 SATA USB Expansion Watch Dog Timer AUDIO Back Panel I/O I/O Onboard Power Supply Form Factor ENDAT-D2512 Intel® NM10 Intel Cedarview N2800 (Dual Core, 1.86GHz, 6.5Watt) Intel Cedarview D2550(Dual Core, 1.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Specification: Model System Chipset CPU Supporting Memory Ethernet VGA LVDS interface Dual view Serial/Print RS 422 / 485 SATA USB Expansion Watch Dog Timer AUDIO Back Panel I/O I/O Onboard Power Supply Form Factor ENDAT-D2512S ENDAT-D2512S1 Intel® NM10 Intel Cedarview N2800 (Dual Core, 1.86GHz, 6.5Watt) Intel Cedarview D2550(Dual Core, 1.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. TABLE OF CONTENTS CHAPTER 1. INTRODUCTION ...................................................... 6 1-1. 1-2. 1-3. 1-4. FEATURES .............................................................................................. 7 UNPACKING ............................................................................................ 8 ELECTROSTATIC DISCHARGE PRECAUTIONS ................................... 8 MOTHERBOARD LAYOUT .......................................
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Chapter 1. Introduction In order to cope with the challenges of the system performance issues and demand of much more visually embedded system in diverse application, ENDAT-D2512 system board provides the ultimate solution with Intel® Cedarview N2800 / D2550 Processors. This package offers a high performance Intel® CPU with optimal power efficiency on the embedded market. ENDAT-D2512 supports single channel DDR3 800/1066 MHz memory.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. 1-1. Features Basic Feature: Intel® Cedarview N2800 / D2550. Single channel DDR3 SO-DIMM socket supports 800/1066 MHz up to 4 GB. Dual PCI Express interface Gigabit Ethernet chip on-board. Intel® Graphics GMA3600. PCI + Mini-PCIe slot support. USB 2.0 x 8 (4 external + 4 internal/1 Share Mini PCI-E Slot, USB port7 share Mini PCI-E slot). Built-in HD Audio with 1.2W amplifier. Four fully functional serial ports.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. 1-2. Unpacking The motherboard comes securely packaged in a sturdy cardboard shipping carton. In addition to the User's Manual, the motherboard package includes the following items: ENDAT-D2512 System Board One SATA HDD Cable Serial (2.54mm) port and Parallel port (2.0mm) Cable. LCD cable and DVI Cable (Optional).
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. 1-4. MOTHERBOARD LAYOUT.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Chapter 2. Setting up the Motherboard 2-1.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. JP6, JP2: COM Port Voltage Selector (2x6 with 2.0mm) Voltage +12V(DC) R.I. * +5V(DC) JP6 (COM1) 1-2 3-4 5-6 JP6 (COM2) 7-8 9-10 11-12 JP2 (COM3) 1-2 3-4 5-6 JP2 (COM4) 7-8 9-10 11-12 JP7: LCD Voltage Select (2x3 with 2.0mm) Voltage +3.3V * +5V JP7 (LVDS1) 1-2 3-4 +12V 5-6 JP4: LCD Backlight Voltage Select (1x3 with 2.0mm) Voltage +5V +12V * JP4 (LVDS1) 1-2 2-3 JP5: LCD Backlight Control Voltage Select (1x3 with 2.0mm) Voltage +3.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. DVI1: DVI Header Connector (2x7 with 2.0mm) Pin No. Description Pin No. Description 1 DVI_TDC2-CN 2 +5V 3 DVI_TDC2+CN 4 GND 5 DVIOUTDATA 6 DVIHPDET 7 DVIOUTCLK 8 DVI_TDC0-CN 9 DVI_TDC1-CN 10 DVI_TDC0+CN 11 DVI_TDC1+CN 12 GND 13 DVI_TLC-CN 14 DVI_TLC+CN Notice: DVI cable is optional. Serial port D-SUB Type Connector for (RS-232) Pin No. Function Pin No.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Serial port Box Headers (2x5 with 2.54mm) Pin No. Function Pin No. Function 1 DCD 6 DSR 2 RXD 7 RTS 3 TXD 8 CTS 4 DTR 9 RI 5 GND 10 N.C. LPT1: Printer Port Box Header (2x13 with 2.0mm) Pin No. Description Pin No. Description 1 STB# 10 ACK# 2 PD0 11 BUSY 3 PD1 12 PE 4 PD2 13 SLCT 5 PD3 14 AFD# 6 PD4 15 ERR# 7 PD5 16 INIT# 8 PD6 17 SLIN# 9 PD7 18-25 GND J1: PS/2 Keyboard / Mouse Header (2x5 with 2.54mm) Pin No. Signal (KB) Pin No.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. J5 (USB 4&5), J6 (USB 6&7): Pin Header for USB ports (2x5 with 2.54mm) Pin No. Function Pin No. Function 1 USB_VCC 2 USB_VCC 3 USBD4 USBD5 USBD+ 6 USBD+ 7 USB_GND 8 USB_GND 9 KEY 10 USB_GND Notice: The JUSBP7 jumper setting for USB Port7 share to mini PCIe slot. J3: Digital I/O Header (2x7 with 2.0mm) Pin No. Function Pin No. Function 1 +5V 2 +5V 3 DIO-OUT0 4 DIO-IN0 5 DIO-OUT1 6 DIO-IN1 7 DIO GND 8 DIO GND 9 DIO-OUT2 10 DIO-IN2 11 DIO-OUT3 12 DIO-IN3 13 +3.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. J9: S/PDIF Header (1 x 5 with 2.0mm) Pin No. Signal (KB) Pin No. Signal (MS) 1 +5V 4 GND 2 N.C 5 S/PDIF-IN 3 S/PDIF-OUT SMB1: SM BUS Header (1 x 5 with 2.54mm) Pin No. Signal (KB) Pin No. Signal (MS) 1 SMB_CLK 4 SMB_DATA 2 +3.3V 5 GND 3 IR_RX FAN1, FAN2: Cooling Fan Connector Pin No. Function 1 GND 2 +12V 3 Sensor Pin DC-IN1: DC Input connector (1x2 with 3.96mm) Pin No. 1 2 Signal GND +12V HDDPWR1: DC Output connector (1x4 with 3.96mm) Pin No.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. LVDS: Single /Dual Channel LVDS (18/24/36/48 bit only, 1.25mm) MB: DF-13A-40DP-1.25V / Map: DF13-40DS-1.25C Pin No. Signal Pin No. Signal 1 VBL 2 VBL 3 GND 4 GND 5 DISP.ON/OFF 6 GND 7 LCD POWER 8 LCD POWER 9 GND 10 GND 11 Odd 0+ 12 Odd 013 Odd 1+ 14 Odd 115 Odd 2+ 16 Odd 217 Odd 3+ 18 Odd 319 Odd CLK+ 20 Odd CLK 21 GND 22 KEY 23 24 Even 0+ Even 0-.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. 2-2. Installing Memory The DDR3 SO-DIMM sockets of ENDAT-D2512 support up to 4GB memory. The speed of DDR3 memory can be DDR3-800 or DDR3-1066. 2-3. Shared VGA Memory The ENDAT-D2512 built-in Intel® GMA3600 graphic engine with DVMT 4.0 up to 384MB system memory. The amount of video memory on motherboard determines the number of colors and the video graphic resolution. 2-4.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Sample code (using TurboC/C++ 3.0): #include #include #include
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. 2-5. Digital I/O Pin define: J3: Digital I/O Header (2x7 with 2.0mm) Pin No. Function Pin No. 1 +5V 2 3 DIO-OUT0 4 5 DIO-OUT1 6 7 DIO GND 8 9 DIO-OUT2 10 11 DIO-OUT3 12 13 +3.3V 14 Function +5V DIO-IN0 DIO-IN1 DIO GND DIO-IN2 DIO-IN3 +3.3V Digital I/O port address: This function is support by onboard super I/O chip; it can be control easily by change the register of super I/O chip via I/O port “2Eh” and “2Fh”.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Sample code for output (using Turbo C/C++ 3.0): bit No 7 6 5 4 3 2 NA NA NA NA DIO-O3 DIO-O2 Map 1 0 DIO-O1 DIO-O0 Sample code for output (using Turbo C/C++ 3.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Chapter 3.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Following setting belongs to standard function setting: Standard CMOS Features The features setting Data/Time and SATA port 、system memory Information. ˙System Date (mm:dd:yy) . ˙System Time (hh:mm:ss). ˙Halt On (All Error, No Error, All, But Keyboard). ˙System Memory Information This submenu provides information about the system memory. Advanced BIOS Features The features setting system boot-up priority and keyboard operation、 BIOS Security.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Integrated Peripherals The features setting IO (serial and parallel port) resources, SATA type and AUDIO、USB Controller set.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. PC Health Status The features Show System temperature、temperature protection 、Fan speed 、 voltage. When the CPU temperature exceeds Shutdown Temperature the set, the system will automatically shut down. When the CPU temperature exceeds CPU Warning Temperature the set, the system will issue a warning sound. Load Optimized Defaults The features Load BIOS default setting. Set Supervisor Password The features Set BIOS setup administrator password.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Chapter 4. VGA, eDP and drivers 4-1. Graphic controller Feature The ENDAT-D2512 integrated a high performance Intel® GMA3600 GFX engine with Intel® DVMT 4.0 technology. The Intel® GMA3600 offering the 3D enhancements enable greater flexibility and scalability. Improved GFX engine support Microsoft DirectX 10, OpenGL 1.5 on Windows, and OpenGL 2.0 on Linux.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. 4-2. Driver Utility Installation Guide 1. When finishing the installation of Windows XP (support 2D graphic only), please install the relative Intel® chipsets, display and AUDIO driver manually for compliance compatibility of hardware environment. 2. Please contact sales department of UNICORN for Embedded OS user driver (Linux, Windows CE and Windows XP embedded). All of embedded OS driver is not be included in any versions of driver CD-ROM from UNICORN.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Appendix A: FLASH MEMORY UTILITY Using this package to update the system BIOS from a disk file to the on board Flash memory. Be aware any improper update of the system BIOS will cause the malfunction of the system. Method of update BIOS: 1. Please contact one of the Sales Representative on behalf of Unicorn to acquire “BIOS update package”, and process following procedures for the BIOS UPDATE. 2.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Appendix B: LVDS PIN ASSIGNMENT LVDS: Single /Dual Channel LVDS (18/24/36/48 bit only, 1.25mm) MB: DF-13A-40DP-1.25V / Map: DF13-40DS-1.25C Pin No. Signal Pin No. Signal 1 VBL 2 VBL 3 GND 4 GND 5 DISP.ON/OFF 6 GND 7 LCD POWER 8 LCD POWER 9 GND 10 GND 11 Odd 0+ 12 Odd 013 Odd 1+ 14 Odd 115 Odd 2+ 16 Odd 217 Odd 3+ 18 Odd 319 Odd CLK+ 20 Odd CLK 21 GND 22 KEY 23 24 Even 0+ Even 0-.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. Appendix C: LIMITED WARRANTY Standard Two years limited warranty on all our ENDAT series all-in-one motherboards and embedded board. Products that become defective during the warranty period shall be repaired, or subject to manufacturer’s option, replaced. The limited warranty applies to normal proper usage of the hardware and does not cover products that have been modified or subjected to unusual electrical or physical stress.
ENDAT-D2512 USERS MANUAL UNICORN COMPUTER CORP. RMA SERVICE REQUEST FORM When requesting RMA service, please fill out this “RMA Service Request Form”. This form needs to be shipped with your returns. Service cannot begin until we have this information. RMA NO.: Company: Person to Contact: Phone No: Purchase Date : Fax No. : Applied Date : Return Shipping Address: Model No. Serial No.
