Instruction manual

i
.LON 100
e3
Hardware Guide 21
the IP address, subnet mask, and the FTP user name and password of the
i
.LON
100 server. This application is optional, as you can also set these parameters
with the
i
.LON 100 Web pages. Echelon recommends that you use the Web pages
to do so, whenever possible.
The DB-9 is designed to be used with a DB-9 null-modem crossover cable with
female connectors on both ends that connects the
i
.LON 100 server and an
available COM port on a computer running the terminal emulation program.
The connector pins on the DB-9 console are aligned as shown in Figure 1.13.
Figure 1.13 DB-9 Connector Pins
Table 1.8 describes each of the connector pins.
Table 1.8
i
.LON 100 Server DB-9 Pin Assignment
i
.LON 100
DB-9 (DTE)
Pin
Description
1 NC (No connect)
2 RxD (Receive Data)
3 TxD (Transmit Data)
4 NC (No connect)
5 GND (Ground)
6 NC (No connect)
7 NC (No connect)
8 NC (No connect)
9 NC (No connect)
DB-9 Shell Earth Ground