Instruction manual

i .LON 100 e3 Hardware Guide 7
!
Safety Warning
Fuse F350 in the i .LON 100 server uses a Wickmann rated 250 VAC, .5 A,
SLO-BLO.
!
Safety Warning
The i .LON 100 server uses a Poly-carbonmonoflouride Lithium Coin battery.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF UNUSED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
!
Safety Warning
The i .LON 100 server is not equipped with a power disconnect device. When
the device is installed and mounted, the installer must provide a means to
safely remove power, such as a power switch or a circuit breaker.
!
Safety Warning
The high-voltage terminal block has a plastic cover protecting the screw
terminals used to connect the high-voltage inputs. This cover MUST be
replaced after the power wires are connected and before the power is
activated.
The i .LON 100 server is powered by a 100-240VAC, 50/60 Hz power mains
connection. This connection is also used for L
ONWORKS network signaling for the
PL-20 models (Models 72103 and 72104). The
i .LON 100 server contains an