Instruction manual

4 i .LON 100 e3 Hardware Guide
Figure 1.1
i .LON 100 Internet Server DIN Rail Locking Tab
Location
Wiring Connections
Once you have mounted the i .LON 100 inside a suitable enclosure, you will need
to wire a series of connections. This includes two rows of screw terminal wiring
connections, an RJ45 data connection, an RJ-11 telephone connection, and a DB-
9 D-connector for connection to a configuration console. The screw terminals are
located on the top and bottom edges of the chassis, and are numbered from 1 to
12 (ascending from left to right) on the bottom row, and from 13 to 28 (ascending
from right to left) on the top row.
Figure 1.2 shows the locations of all the
i .LON 100 server connectors: