User guide

15.3 Temperature alarm

1. Two temperature degree units: Celsius ° C and Fahrenheit ℉;

2. Enable on means this sensor turns on

3. Temperature is sent back to the device by a temperature sensor. As long as you set a high

or low temperature alarm threshold and turn on enable. When the temperature is above or

below the threshold, the device generates an alarm which can also be transmitted to centre

SVC platform to record alarm information.

4. When selecting Type to be Event, the record file is a normal record. When selecting the

type of alarm the record file type is alarm.

15.4 Motion Detection

1. Enable on means this sensor turns on

2. The sensitivity can be set L (low), M (medium), H (high). The higher the sensitivity level,

the easier to detect environmental change.

3. Detection area: Using two points of the diagonal to determine the detection area. Select

the first point, press ENTER on remote and then use the up, down, left and right arrow

keys on remote to select another point of the diagonal. Pressing enter key again within

selected area will cancel this area selecting.