User guide

The main process of SVC 420/820GPS-L quick reporting is shown below

Step 5: Enter the system menu – peripheral – wireless broadband, which is with wireless

settings inside.

A: Wireless 3G settings

Please pay attention to the supporting type of network during wireless 3G setting: WCDMA,

EVDO and TD-SCDMA. Also note the access point and the center number. The user name is

in default in domestic and there is no need to modify this. However, there is also in some

domestic places, the 3G card needs to be entered by user name and password and some

foreign operators will need to be modified too. It is therefore required to input relevant

information according to the local network data. You can press INFO key to query whether

dialing is successful or not after setting.

B: local IP settings

Local IP is set for LAN and WAN access, you will

also need to set the Server IP, this is the Server to

which the SVC420/SVC820 is reporting to. More

setup info in section 4.11