User guide

21
3.4 Power Cable
The Power cable pictured above has a 6pin white plug located on the end, which connects
with the 6pin white plug on the back panel of the unit. The red and black cables directly
connect to the vehicle's battery (Red cable to positive, black cable to negative). The Yellow
cable is FIREWIRE. The device will automatically start when the ignition is started and stop
when the ignition is stopped. The yellow cable must be connected to the vehicle ignition.
Please Note：
1）Before connecting the unit to the vehicle please confirm the voltage is between 8V—36V.
if over this range the device will not function.
2）After connecting the cables, Ensure that power cables are insulated to prevent short
circuiting and burning out the battery.
3）The Yellow cable must be connected to the vehicle ignition cable, otherwise the device will
not be able to execute the delayed shutdown and the final moment of the video will be lost.
4）Connection to the vehicle's engine must be connected directly to the positive a node of the
battery. Do Not Use bond strap for grounding, as it will produce negative pulses that would
interfere with the device's normal operation. The negative pole of the power code must be
Φ1.5mm and above.