Specifications

Item # Description Code List Price
196
L-com Cable Testers
2006-2007 Master Catalog
Prices and specifications subject to change.
E-mail: [e-mail] Fax: [phone] Toll Free: 1-800-343-1455 Hours: Mon - Thu 8am-6pm,Fri 8am-5pm EST
L-c om
®
CONNECTIVITY
PRODUCTS
© 2006 L-com,Inc. All Rights Reserved. L-com Connectivity Products and the L-com logo are registered marks.
One or more items in a product family are
RoHS compliant and/or partially compliant.
Access www.L-com.com for latest status.
DXB66 UTP, FTP and Coaxial PROFESSIONAL TEST SET for LAN Cabling and Premise Wiring
L-com’s DXB66 Remote Cable Tester provides accurate testing of premise cabling and patch cords used in local area networks. The unit verifies pairing
following the EIA/TIA568 standard. It also tests shield continuity of shielded RJ45 connectors which is required in European building installations and areas
where noise is prevalent. BNC equipped, coaxial cabling such as Ethernet 10Base-2 can also be tested.
DXB66 UTP, FTP and Coaxial Professional Test Set A, C, D, E, F 69.00
DXB66-CC Additional DXB66 Carrying Case with Beltstrap 12.95
DXB64A Triple Function Cable Tester - 10Base-T, Token Ring (RJ45) and EIA568
This easy-to-use sequential scan cable tester provides instant testing and identification of today’s most popular UTP cabling schemes. Four, two-color
LEDs verify continuity of up to four pairs while instantly detecting opens, shorts and miswires. Specially designed slide attachment allows tester’s master
and remote sections to be separated when checking installed wiring. Blinking light identifies power on and low battery. Small and light enough to fit neatly
in a briefcase, toolbox or pocket. Equipped with 9V alkaline battery and protective leatherette case.
DXB64A EIA568 (RJ45) Remote Cable Tester B, C, D, E, F 39.95
DXB65 Dual Function Ethernet Cable Tester - 10Base-T and 10Base-2 (ThinNet)
Specially designed for the Ethernet user. This tester is a full-function BNC coaxial tester and 10Base-T UTP tester rolled into one. Detects shorts and opens
on coaxial lines terminated with male BNC connectors and also tests for continuity of the 1-2 and 3-6 pairs used in 10Base-T wiring. Tester master and
remote units slide apart for checking installed wiring. Auto shut-off when cable is disconnected. Small, lightweight and easy to use. 9V alkaline battery
and convenient leatherette carry case supplied.
DXB65 Ethernet 10Base-2 (BNC) & 10Base-T (RJ45) A, B 39.95
Remote Cable Tester
L-com’s Modular Patch Cord Testers Allow Benchtop Testing of Popular Cable Types
The DX45 modular patch cord tester quickly and easily tests the continuity of modular cables. Simply plug both cable ends into the unit and observe the
indicators on the faceplate. Dual colored LED's verify if cabling is properly wired for data use (straight through pinning) versus telephone use (crossed
pinning). Additionally, the DX45 identifies Opens in a cable. The DX45 is intended for cabling terminated with 8 position modular plugs (RJ45), and 6
position modular plugs (RJ12/11) using the included inserts. The DX45 is powered by a single 9V alkaline battery already installed for instant use. Outside
dimensions: 3.8" x 2.4" x 1.1". Features a 1-year manufacturer’s warranty.
DX45 8 Position Modular Patch Cord Tester (RJ45) with Inserts G, H 22.95
DXBCC Carrying Case for DX Testers 3.99
DXB64A
DXB65
DXB66
Test Shielded
RJ45
Our most
popular unit
for ethernet
cable testing
DX45
Video clip at
www.L-com.com/videos/A07
• Equipped with RJ45 jacks
• Tests 4 pair UTP cabling following EIA/TIA568A or B standards
• Master and remote units split apart for premise runs, then reattach for
bench testing
• 4 dual polarity LEDs sequence from left to right identifying shorts, opens
and miswires
• Supplied with one 9V Energizer alkaline battery and carrying case
• Equipped with RJ45 and BNC jacks
• Tests 2 pair UTP cabling used in 10Base-T Ethernet runs.
• Tests coaxial cabling terminated with BNC connectors used in 10Base-2
Ethernet busses
• Master and remote units split apart for checking premise runs and
installed coaxial busses.
• Can be used for locating shorts in coaxial patch cords or T adapters
• Supplied with one 9V Energizer alkaline battery and carrying case
• Sequencing LEDs verify continuity of 4 pair UTP/FTP cabling following
EIA/TIA568 A or B pair designations (Ethernet 10Base-T, Token Ring and
TP-PMD are all accounted for within the EIA568 code)
• Tests for presence of shield in Foil Twisted Pair (FTP) or Token Ring -
Shielded Twisted Pair (STP) cabling
• Internal circuitry is fully protected against live cable damage
• BNC coax test checks Ethernet 10Base-2 busses and patch cords
(adapters are available for testing other coaxial terminations)
• Dual colored LEDs identify shorted, open, or reversed pairs
• Remote and master units separate for premise wire tests and reattach
for patch cord checking
• Convenient size with exclusive slide lock mechanism allows effortless
patch cord and premise cable testing
• Easy to operate with all instructions listed on the faceplate
• Adapters available for testing Token Ring cabling utilizing Type A or B,
DB9, or RJ45 connectors
• Runs on one 9V alkaline battery (included)
• Includes belt mountable soft leatherette case, 2 screened patch cords
and informative instruction booklet
Specifications
:
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 LEDs Master
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 LEDs Remote
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9V Alkaline battery
Current drain (on) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA
Normal power consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 mW
Maximum power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . 630 mW
Minimum battery operation voltage . . . . . . . . . . . . . . . . . . . . . . 6.0Vdc
Maximum cable length (4pr.). . . . . . . . . . . . . . . . . . . . . . . . . . . . tested to 1000 ft
Over voltage protection level (max). . . . . . . . . . . . . . . . . . . . . . . 30 V dc
Allowable maximum current @ inputs . . . . . . . . . . . . . . . . . . . . 0.3 A dc
Continuous withstand overvoltage rating . . . . . . . . . . . . . . . . . . 20.0 V dc @ 0.1 A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for 5 seconds
Master & Remote dimensions connected . . . . . . . . . . . . . . . . . . . 6.0 in x 2.3 in x 1.0 in
Master and Remote weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.0 oz.
RJ45
10Base-T
Ethernet Coax
10Base-2
1 2 3 4 5 6 7 8
PR4
PR3
PR2
PR1
1 2 3 4 5 6 7 8
RJ45
EIA/TIA568A
RJ45
EIA/TIA568B
8-Position
Token Ring
TP-PMD
PR4
PR3
PR2
PR2
PR1
PR1
1 2 3 4 5 6 7 8
PR2
PR4
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
A B C D E F
PR2
PR1
Code shows tester ability to check:
RJ12
USOC6
1 2 3 4 5 6
PR3
PR2
PR1
G
RJ45
USOC8
1 2 3 4 5 6 7 8
PR4
PR3
PR2
PR1
H
Distributors Wanted - Call 1-800-343-1455
2K6_MV2_NW&TestEquip_2.qxd 09/07/06 4:56 PM Page 196
DXB66-CC
DXBCC
DXB66
DXB66
DXB65
DXB65
DXB64A
DXB64A
DX45
DX45