Specifications

Introduction
Congratulations on purchasing a quality UNICOM product.
Unicom’s VELOCITY Series represents the newest, most advanced
generation of signal conversion technology.
This converter is designed to expand your network through a fiber optic
connection extending a fiber link up to 60 km (Single mode in full duplex
mode).
The 10/100TX/100FX Converters offer the most popular fiber cabling
connectors: MT-RJ, SC, and ST formats in Multi-mode and SC in Single
Mode. The UTP port supports the Auto MDI/MDIX function and there are
4 DIP switches to set the operation mode for the UTP ports, Fiber ports,
the Link Loss Forwarding function, and the converter mode. These
converters can be used in Unicom’s 10 bay VELOCITY Media Chassis or
as stand-alone components.
Key Features
■
Complies with IEEE 802.3, 802.3u, and 802.3x standards.
■
Converts between UTP cabling and Fiber Optic cabling.
■
One RJ-45 connector, Auto-MDI/MDIX for UTP port.
■
Supports 10/100 Mbps Auto-negotiation for UTP port.
■
Fiber cabling connectivity up to 60Km.
■
Uses store-and-forward switching to separate collision domains.
■
One fiber connector (SC/Single Mode or MT-RJ, SC, and ST/Multi-
Mode) for 100Base-FX.
■
Prevents packet loss by supporting back-pressure & flow control.
■
Four DIP-switches for operation mode setup and Link-Loss
Forwarding function.
■
Per port LEDs for diagnosis and maintenance
■
External DC power adapter, 9V DC/700mA
■
Can be mounted in chassis or used as stand-alone.
■
FCC Class A, CE Mark certification
2