Specifications

Figure 4. Front panel view of LED indicators
Status LEDs
Network Application
This section provides a few samples of network topology in which the
Switches are used. The Dyna-Switch/16 and 24 are designed to be
used as segment switches. With their large address tables (4K MAC
address) and high performance, they are ideal for interconnecting
networking segments.
With the Dyna-Switch/16 and 24, you can interconnect PCs,
workstations, and servers to each other.The switch automatically learns
node addresses, which are subsequently used to filter and forward all
traffic based on the destination address.
Small Workgroup
The Dyna-Switch/16 and 24 can be used as standalone switches
interconnecting personal computers, servers, and print servers forming a
small workgroup.
54
LINK/ACT and FDX/COL
Indicators
Power Indicator
LED Status Color Description
Power On Green The switch is supplied with
suitable power.
On Green The port is connecting with
the device.
LINK/ACT Blinks The port is receiving or
transmitting data.
Off The port is not linked
successfully with the device.
On Orange The port is operating in Full
Duplex mode.
FDX/COL Blinks A packet collision occurred at
this port.
Off No device attached or the port is
operating in Half Duplex mode.
Printers
Server
Workstations
L
K
/A
C
T
F
D
/
C
OL
F
D
/COL
L
K
/A
C
T
D
y
na
-Sw
itc
h/16
1
6 Port
10
/
10
0
B
ase-T
X
Switc
h
POW
E
R
Figure 5. Small Workgroup Application