Digital Media Adapter
WS-302 Digital Media Adapter User’s Manual Table of Contents Table of Contents ...................................................................................................................................... 2 1 Product Introduction ...................................................................................................................... 3 1.1. Features...............................................................................................................................3 1.2.
WS-302 Digital Media Adapter User’s Manual 1.1.Features Support various TV modes WiFi 802.11g & LAN connectivity Video Streaming Play from PC without extra program Multimedia Streaming Play from SC-203 or NAS DVD navigation USB storage plug-and-play Home Theater Quality, better than watching on PC Content Browsing: All playable files in the shared folder (and sub folders) of PC and SC-203. Previous, Next, Play All , Repeat.
WS-302 Digital Media Adapter User’s Manual Multi-language UI : Power : LEDs Certification Requirement of PC : or random play a folder of MP3 files English, French, German, Spanish, Japanese, Chinese 5V (WS-302) or 12V (WS-302D) DC universal Switching power adapter (UL, C,E, PSE approved) Power, CVBS, YPbPr, DVI, SCART FCC, CE Windows (XP, 2000), Linux, LAN or WiFi connection 1.3.
WS-302 Digital Media Adapter User’s Manual Descriptions of System Application Diagram 1. The functions of WS-302 Play images, audio or video stored in USB, DVD, remote PC, or Unication’s SC-203 to your home stereo or TV. 2. The functions of PC or SC-203 connected to WS-302 The media storage for WS-302 3. WS-302 can be connected to a PC via a hub or SC-203. Version: V0.
WS-302 Digital Media Adapter User’s Manual 2 Hardware Quick Installation Guide Quick Installation Guide Start here Network cable Antenna 5v DC Power adapter AV cable WS-302 1 Antenna Connect antenna to Antenna WS-302 Remote control AAA Batteries 2 Video Quick Installation Guide Video in Connect video to TV CVBS (The first two connectors from right.) Audio Audio Audio in out Connect audio to TV 4 Remote Control Install the batteries in remote control 3 (Be careful of the plenty of battery.
WS-302 Digital Media Adapter User’s Manual Advance Installation Guide Select best video quality 1. DVI is better than YPbPr(component). YPbPr is better than CVBS(composite). Video out YPbPr Composite DVI 2. Turn on the TV and change the display mode of the TV to the Video or YPbPr, DVI mode Quality Better Good Best 3. Use Remote Control to change video output.. At the same time, change the TV video input correspondingly. 4.
WS-302 Digital Media Adapter User’s Manual 3 Hardware Connectors and LEDs 1 2 Power DVI CVBS YPbPr SCART USB1 USB2 1 USB 2.
WS-302 Digital Media Adapter User’s Manual 4 Remote Control Power TV Mode Record Eject Angle Program Repeat Shuffle PBC Title Subtitle Language Home MENU Enter OSD/ Help Return Play/Pause Step Zoom Stop F.R. F.F. PREV Next ghi jkl mno 1 @./: 4 2 5 pqrs tuv 7 8 A/a 3 abc +- ＊ def VOL 6 wxyz Mute 9 = Delete A-B 0 S.R. S.F. Page up Page down Clear URL Search TV/Browser Unication Version: V0.
WS-302 Digital Media Adapter User’s Manual 4.1. Remote Control keys falls into 5 groups: 1. Device (workable at any time, including menu navigation and local & remote play) -Power (Red) : UI clear, video clear -Eject (Orange) : working in DVD mode -TV mode (Green) NTSC/PAL/480/720/1080 (save in flash) 2.
WS-302 Digital Media Adapter User’s Manual 4.2. User Interface (1) Remote (2) USB1 (3) USB2 (4) DVD (5) Setting -Audio : 2 Channel or 5.
WS-302 Digital Media Adapter User’s Manual 5 Operations Overview Before you do the following operations, make sure that you have finished the hardware installation as described in the “Hardware Quick Installation Guide” section. 5.1. Launch the Home Menu 1. Follow the “Hardware Installation” to connect all the necessary devices. 2. Turn on the TV and change the display mode of the TV to the Video or YPbPr, DVI mode, and then press “TV mode” key of the WS-302 Remote Control to displays the Home menu.
WS-302 Digital Media Adapter User’s Manual 5.2. Structure Overview USB Internet LAN WAN Step2 ADSL/Cable Modem Thumb Drive Camera Step1 WS-302 Step3 Step1: 1. 2. 3. 4. Digital Audio/Video files are created (movie in MPEG4, DivX or WMV9) or copied from DVD-ROM or TV capture cards. Put the files under share folder Network_Disk, with username “guest ” Or upload the files to SC-203 public area with Samba by \\(sc203-domain name) Or upload the files to SC-203 private area with HTTP by http://(sc203-do
WS-302 Digital Media Adapter User’s Manual 5.3. Play the Media Files Stored in the SC-203 for the first time 1. Make sure you have WS-302 connected to SC-203 via wired LAN or wireless LAN after Network Settings completed. 2. You need to enter the IP address of your device and SC-203 or Remote PC (More detail please refer to chapter 5.5.4 Settings) 3. In SC-203, place the media files in the shared “network_disk” folder. 4. In the Home Menu, select “Remote” then press 5.
WS-302 Digital Media Adapter User’s Manual 6. If you want to hear music, select “Audio” then press 7. Use Remote to select the file then press file. Version: V0.4 / Data: 2005 04 Enter Enter [Enter].
WS-302 Digital Media Adapter User’s Manual 5.4. Play the Media Files Stored in the PC for the first time 1. Make sure you have the WS-302 connected to PC with wired cable or WiFi via SC-203 or a hub after Network Settings. 2. In the remote PC, create a folder called “network_disk” and share it to the user whose user name is “guest” and the password is “guest” 3. In the remote PC, place the media files in the “network_disk” folder. 4.
WS-302 Digital Media Adapter User’s Manual 5.5. Play the USB Media Files 1. Plug in the USB storage device in the USB slot. (USB1 or USB 2 slot),. 2. Turn on your TV and change the display mode to “Video”, which displays the Home Menu on the TV screen. 3. Use the WS-302 Remote Control 4. Press Enter or button to select USB1 or USB2. [Enter], then the Audio/ Video/Pictures menu appears. 5.
WS-302 Digital Media Adapter User’s Manual 6 WS-302 User Interface (Complete UI Operations) Note: You can launch the Home Menu from any screen by pressing Home or Return key of the WS-302 Remote Control. You can launch the Home Menu from any screen by pressing Home or Return key of the WS-302 Remote Control. During the initial startup, the WS-302 displays the setup screen. Press [Enter] on the remote control to enter the Remote screen. Version: V0.
WS-302 Digital Media Adapter User’s Manual 6.1. Remote 1. Make sure you have WS-302 connected to SC-203 (test) via wired LAN or wireless LAN after Network Settings. Currently the SC-203 server is the Online Service available on channel 2. 2. In the remote PC, create a folder called “leo” and share it to the user whose user name is “guest” and the password is “guest” 3. In the remote PC, place the media files in the “leo” folder. Audio 4. Play the Audio Files.
WS-302 Digital Media Adapter User’s Manual Video 5. Play the Video. In the SC203 (test) Menu, press “Enter” on the remote control to play the Video files. Video (Continued) Using the Remote Control with Video files Enter Enter – Click Enter to play your highlighted media files. PLAY/PAUSE – Pause the video and to resume playing the video. (VOL) – To increase the volume. (VOL) – To decrease the volume. MUTE – To silence the audio portion of the video. FF – To fast forward through the video.
WS-302 Digital Media Adapter User’s Manual 7. In the SC203 (test) Menu, use the selection arrows to navigate to the Return and press “Enter” or press [Return] on the remote control to Return the preceding menu. 8. Once you enter the Audio menu, Prev Page – View the previous page on the you can view your list of audios. Audio menu Use the or to navigate to the folder you wish to view. Highlight the functions icon, and press Enter [Enter] to view the audio folder. 9. Below are the on-screen Version: V0.
WS-302 Digital Media Adapter User’s Manual indicators when a button is pressed. These icons will appear in the left of the screen Next Page – View the next page on the Audio menu Play All – Play the continuous files of all on the Audio menu Version: V0.
WS-302 Digital Media Adapter User’s Manual Back – Back to the last page 6.2. USB1 1. Make sure you insert the USB storage device connected to the usb port of WS-302’s front panel. 2. During the initial startup, the WS-302 displays the setup screen of USB1. Press [Enter] on the remote control to enter the USB1 screen. 3. Then you can reference the Remote’s operations to using. 4. Once you enter the Audio menu, you can view your list of audios. Use the or to navigate to the folder you wish to view.
WS-302 Digital Media Adapter User’s Manual 7. Or press [Return] on the remote control to Return the preceding menu. Version: V0.
WS-302 Digital Media Adapter User’s Manual 6.3. USB2 WS-302 supports 2 USB storage devices to play. You can reference the USB1’s operations to use. 6.4. Settings Basically, you don’t need to change default settings except to enter the IP address of your device and SC-203 or Remote PC. If you want to change the configuration of your setup you can press [Enter] on the screen of the Settings button. The following describe to change the different settings: Home screen Æ Settings Æ Network Version: V0.
WS-302 Digital Media Adapter User’s Manual To check your Ethernet network settings or Wireless network settings if it is correct. Home screen Æ Settings Æ Network Æ Network Status Home screen Æ Settings Æ Network Æ Network Status Æ Ethernet To see the Ethernet Status: Home screen Æ Settings Æ Network Æ Network Status Æ Ethernet (press [Enter]). Ex. ( IP : 192.168.5.100 Netmask: 255.255.255.0 Gateway: 192.168.5.1 ) It means you can access Intranet via the Ethernet (LAN) network. Version: V0.
WS-302 Digital Media Adapter User’s Manual To see the WiFi Status: Home screen Æ Settings Æ Network Æ Network Status Æ Wireless (press [Enter]). There is no value on WiFi Status. It means you can’t access Intranet via the Wireless (WiFi) network.
WS-302 Digital Media Adapter User’s Manual Select Manual to configure Ethernet manually. Home screen Æ Settings Æ Network Æ Ethernet Setting Æ Manual. Home screen Æ Settings Æ Network Æ Ethernet Setting Æ Manual. (press [Enter]). z IP: Enter the IP address of the WS-302 z Netmask: Enter the subnet mask of the WS-302 z Gateway: Enter the IP address of the router on your network Ps. IP and Gateway are the same subnetmask, so they are alike. (all 192.168.5.
WS-302 Digital Media Adapter User’s Manual To configure WiFi Setting: You can select “Auto” to auto acquired a IP or select “Manual” to configure manually or select “Disable” to disable the WiFi’s function or select “Encryption” to protect WiFi to avoid Intruder: Select Auto to configure WiFi automatically. Home screen Æ Settings Æ Network Æ WiFi Setting Æ Auto. Select Manual to configure WiFi manually. Home screen Æ Settings Æ Network Æ WiFi Setting Æ Manual.
WS-302 Digital Media Adapter User’s Manual Select “Fix IP” to configure IP manually Fix IP is used for peer to peer wireless networks that do not contain a router or an access point. Select “DHCP” to auto acquired a IP address DHCP is used for networks with an access point or router. Version: V0.
WS-302 Digital Media Adapter User’s Manual Select Disable to stop WiFi configurations. Home screen Æ Settings Æ Network Æ WiFi Setting Æ Disable. (press [Enter]) Select Encryption to protect WiFi configurations. Home screen Æ Settings Æ Network Æ WiFi Setting Æ Encryption. (press [Enter]) Version: V0.
WS-302 Digital Media Adapter User’s Manual WEP (Wired Equivalent Privacy): An industry standard encryption technology used by 802.11b wireless devices. There are three options configurable under this setting, Disable, 64 bits, and 128 bits. To toggle between the options, press the [Enter] button when WEP is highlighted. Key: To connect to an encrypted wireless device, the key you enter here must match the key of the device exactly.
WS-302 Digital Media Adapter User’s Manual 128 bits: A 128-bit encryption key must be exactly 26 characters in length. (Example: 1234567890ABCDEFABCDEFABCD is a valid string of 26 characters for 128 bits encryption) Version: V0.
WS-302 Digital Media Adapter User’s Manual Select Remote Device Setting to setup Remote. Home screen Æ Settings Æ Network Æ Remote Device Setting Æ Device1. (press [Enter]) Remote Content Devices: Setup your remote device its connection name, host name (IP address), shared path name, user name , and password. When done, press [Enter]. Note: 1. Make sure you have WS-302 connected to other device via wired LAN or wireless LAN after Network Settings. 2. Then select a channel (Device1 – Device5) to configure.
WS-302 Digital Media Adapter User’s Manual Select DNS Setting to setup Remote. Home screen Æ Settings Æ Network Æ Remote Device Setting Æ Device1. (press [Enter]) DNS Setting: Enter the IP address of the domain name server. If your WS-302 use DNS (Domain Name Service) to Internet. Audio Setting Home screen Æ Settings Æ Audio. Version: V0.
WS-302 Digital Media Adapter User’s Manual Home screen Æ Settings Æ Audio Æ SPDIF Out Two Audio options for selection: (1). SPDIF is digital output for high quality. - Analog/DPCM: 2 Channel - Encoded Digital: 5 Channel (2). Audio is analog output: - 2 Channel - 5.1 Channel z 2 Channel means 2 trumpets and supports all media files. z 5.1 Channel supports DVD media files. Version: V0.
WS-302 Digital Media Adapter User’s Manual Audio Setting Home screen Æ Settings Æ Video. (1). NTSC Active Output: - SD CVBS - HD YPbPr - HD DVI Version: V0.
WS-302 Digital Media Adapter User’s Manual (2). HD DVI/VGA: - 480P - 720P - 1080i - 640x480 - 800x600 - 1024x768 - 1280x1024 (3). HD YPbPr: - 480P - 720P - 1080i (4). Screen Type: (select your TV screen 16:9 or 4:3) - 4:3 Letterbox - 4:3 Pan-scan - 16:9 Version: V0.
WS-302 Digital Media Adapter User’s Manual Select Firmware Version to see the WS-302 currently version. Home screen Æ Settings Æ Others Æ Firmware Version Select Firmware Upgrade to upgrade the WS-302 currently firmware version. Home screen Æ Settings Æ Others Æ Firmware Upgrade Note: New Firmware files stored in USB flash then update to the device. Version: V0.
WS-302 Digital Media Adapter User’s Manual Select Restore to Default to reset the WS-302 system. Home screen Æ Settings Æ Others Æ Restore to Default. Restore to Default: You will lose all current settings when selecting this option. The Factory defaults will be restored and any settings you have entered will be erased. Version: V0.
WS-302 Digital Media Adapter User’s Manual 7 Additional Information Unication Consumer Web Site FCC Statement On www.uni.com.tw or ww.uni-wlan.com, there is a Support Section where help and tips are only a few clicks away. Here you find the latest software updates, guides to use the products more efficiently. This device complies with Part 15 of the FCC rules.
WS-302 Digital Media Adapter User’s Manual Enter Headquarter: Unication Co., Ltd. Tel.:886-2-22999678 Fax: 886-2-22997998 E-mail:salesenquiry@uni.com.tw Address: 5F., No.6, Wu-Kung 5Rd., Hsinchunag City, Taipei, Taiwan, R.O.C Unication USA: Dallas Branch: Tel.:1-972-424-8908 Fax:1-214-245-4857 E-mail:kirk@uni.com.tw All rights reserved. This document is published by Unication Co., Ltd. The information contained in this document is the exclusive property of Unication Co., Ltd.
15.21 Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
