Service manual

June 21, 2004 1-23
NP88 FLEX GENERAL
Maintenance
Removing the Back Cover
1. Hold the pager with the back cover facing up .
Figure 1- 10.
When performing the following step, ensure the pager is not damaged when inserting
the disassembly tool into the exposed battery end. Do not push the disassemblytool
all the way inside of the pager.
2. Insert the flat head of the disassembly tool int o the open battery end, no more
than 1/2 inch, and place it between th e flexible latch on the front housin g and
chamfered rib in the ba ck cover. Refer to Figure 1-11 for correct placement of
the dis assembly tool.
Figur e 1-11.