Service manual

June 21, 2004 1-15
NP88 FLEX GENERAL
Product Overview
FLEX-Specific Options
Group Call/Independent Second Address
Thegroupcall optionallowsmultiplepagerstobe alertedatthe sametimebyusing
the second FLEX address programmed as a Group address. The individual is
contacted in one of two wa ys: individually or as part of a group. Refer to Table 1-4
for a list of the options a nd the address combinations.
Priority Override
The Priority override function causes a tone alert while the pager is in the silent
mode of operation. If a FLEX priority page is received, on any address, a priority
page t o ne alert occurs. Any FLEX address can be tagged as containing a priority
page. FLEX priority alerts function the same way as the normal alert s, differing
only in the silent alert mode.
Automatic Adjusting Baud
TheNP88FLEXpagerisdesignedtodecodeallFLEXtransmissionspeeds.The
pager automatically adjusts to one of three FLEX transmission speeds; 1600 bps,
3200bps,or6400bps.
Table 1-4. FLEX Code Options
Address 1 Address 2
Data/Short Address Not Active
Data/Short Address Data/Short Address
Data/Short Address Data/Short Address/Group
Data/Long Address Not Active
Data/Long Address Data/Short Address
Data/Long Address Data/Short Address/Group
Data/Long Address Data/Long Address
Data/Long Address Data/Long Address/Group