Instruction manual

Instructions for HSCP calibration/adjustment

3.25 - ACTIVATION CHIMNEYSWEEPER

MODE

Press key B (menu)

Turn the knob C until the symbol appears

Press key A

(selection)

Turn the knob "C" until Manual Control appears on the

display

Press key ‘’A (selection) (and you enter in the menu

“Password check”)

Turn the knob ‘’C’’ to ZERO

Press key A

(1° zero) appears on the display

Press key A (2° zero) appears on the display

Press key A (3° zero) appears on the display

Press key A (4° zero) appears on the display

For activating the "CHIMNEYSWEEPER MODE" proceed as

follows:

on the display)

Turn the knob C on

Press key A (store)

Turn the C until "Manual control" appears on the

display.

Select the activation command of the function

Select the modulation level setting and change it as follows:

MAXIMUM OUTPUT = 100%

The system will fire at the MAXIMUM HEAT OUTPUT =

100%: Proceed with the combustion analysis