Instruction manual

27
Instructions for the installer
Guide the burner plug through the side cable clamp pla-
te(6) and clamp the cable using the cable clamp sup-
plied. Fix the side cable clamp plates to the casing side
panels.
Refit the upper shell of the control panel.
H. Fit the top panel (8) and fix it onto the side panels (4 & 5).
I. Fix the retaining strips (9) onto the lower left hand side
rear panel (4) and to the upper panel (8).
10
8
4
8
4
5
L. Fit the right hand side rear panel (10) onto the left hand
side rear panel (4) and to the upper rear panel (8).
10
9
Fix the platelets (pos 6) support the two sides of the con-
duit and the plate (pos 7) closing the lateral left side.