Instruction manual

25
Instructions for the installer
3.16 - CASING ASSEMBLY
(con pannello comandi montato a destra)
2
1
3
A. Fit the insulation blanket (1) onto the boiler shell and secu-
re in to place using the elasticated straps (2) provided,
ensuring that the metal clips grip in to the external surface
of the insulation.
B. Fit the boiler shells top insulation blanket (3) and secure in
to place using the elasticated straps (2) provided, ensu-
ring that the metal clips grip in to the external surface of
the boiler shell's insulation.
Make a convenient cut in the upper part of the insula-
tion blanket to get easy access to the bulb holders
C. Fit the self-tapping screws onto the internal profiles of the 2
side panels (4 and 5 ).
D. Fit the left side panel (4) fixing it on to the front panel and
securing it to the top left squadretta on the boiler shell,
inserting the lower bend inside the bottom L profiles.