User's Manual

40 080306A-1
TROUBLESHOOTING
A. TELEPHONE UNIT TROUBLESHOOTING TABLE
SYMPTOM SOLUTION
No dial tone Check the telephone line cord connectors at both ends
to see that they are pushed in firmly until they click.
If you had a power failure or unplugged the base
unit, replace the handset on the base unit for two to
five seconds to reset the system.
Does not ring
Check the RINGER mode on the handset. For
normal use, set to RING 1,2,3,4. The handset will
not ring in OFF mode.
Check the telephone line cord connectors at both
ends to see that the
y
are
p
ushed in firml
y
until the
y