User's Manual

38 080306A-1
Each combination of the code is randomly generated by factory equipment.
IMPROVING CORDLESS RECEPTION
Follow these guidelines to improve cordless sound quality:
• Select an area to install the unit where it is closest to the center of your
home or office. This will improve the operating range of the unit.
• Keep the base unit away from electrical equipment. Radio Frequency
Interference (RFI) is sometimes generated by these appliances, which can
cause degradation in cordless reception.
• Keep the handset batteries charged as much as possible. Weak handset
batteries can limit the range of cordless operation.
MAXIMIZING BATTERY LIFE
Repeated use or recharge of Ni-Mh batteries without periodic full discharge
results in reduced useable charge time. When you notice the usable charge
duration decreasing, fully discharge the Ni-Mh battery and recharge as
described:
DISCHARGING
1. Unplug the telephone line cord from the UA23324H.
2. Make sure that the adapter is connected.
3. Lift the handset out of the base cradle.
When the handset battery voltage level is low, the “BATTERY LOW” icon will
flash. Let it fully discharge for 14 hours. Once the Ni-Mh battery is fully
discharged, you should now charge the battery to its full capacity.
CHARGING
1. Make sure the adapter and telephone line cord are connected to the
UA23324H.
2. Place the handset on the base cradle. The CHARGE LED indicator of the
base unit will light steadily.
3. Leave the handset charging on the base for 14 hours continuously to get a
maximum charge.
4. The UA23324H is now ready for regular use. Discharge and charge the
Ni-Mh battery again once you notice a decrease in the useable charge
time.