User's Manual

36 080306A-1
CONTRAST SETTING
1. Press the MENU/OK button.
2. Press the
or button to select “HS SETTING”
3. Press the MENU/OK button.
4. Press the
or button to select “CONTRAST”.
5. Press the MENU/OK button.
6. Press the
or button to select level 1, 2, 3, 4, 5.
7. Press the MENU/OK button to confirm.
8. Press the
button to return to idle mode.
SELECT BASE SETTING
This function allows the user to select a base from those already registered to
the handset.
1. Press the MENU/OK button.
2. Press the
or button to select “HS SETTING”
3. Press the MENU/OK button.
4. Press the
or button to select “SELECT BS”.
5. Press the MENU/OK button.
6. Press the
or button to select "BASE 1, 2, 3, 4 or AUTO".
7. Press the MENU/OK button to confirm.
AREA CODE SETTING
This function allows user to set a different area code for CID incoming call
display. (Max 4 digits). This feature can hide the area code that you specify, so
when a local call is incoming, you will only see the 7 digit telephone number
without the area code, even call back the number as 7 digits in caller ID.
1. Press the MENU/OK button.
2. Press the
or button to select “HS SETTING”
3. Press the MENU/OK button.
4. Press the
or button to select “AREA CODE”.
5. Press the MENU/OK button.
The LCD will show “ AREACODE SET”.
6. Use the telephone keypad button to enter AREA CODE.
7. Press the MENU/OK button to confirm.
8. Press the
button to return to idle mode.