User's Manual

080306A-1 31
6. Press the or button to select TONE or PULSE.
7. Press the MENU/OK button to confirm.
8. Press the
button to return to idle mode.
FLASH TIME SETTING
The user can select to change the Flash Time.
1. Press the MENU/OK button.
2. Press the
or button to select “ BS SETTING”
3. Press the MENU/OK button.
4. Press the
or button to select “ FLASH TIME”
5. Press the MENU/OK button.
6. Press the
or button to select 100MS, 300MS, 600MS or
1000MS.
7. Press the MENU/OK button to confirm.
8. Press the
button to return to idle mode.
MODIFY PIN SETTING
This function allows the user to change the pin number of the currently active
Base.
1. Press the MENU/OK button.
2. Press the
or button to select “ BS SETTING”
3. Press the MENU/OK button.
4. Press the
or button to select “ MODIFY PIN”
5. Press the MENU/OK button.
6. Enter the PIN NUMBER. (The factory default is “0000”)
7. Press the MENU/OK button. The LCD will show “NEW PIN”.
8. Enter the new pin number.
9. Press the MENU/OK button. The LCD will show “COF PIN”.
10. Enter the new pin number again.
11. Press the MENU/OK button to confirm.
12. Press the
button to return to Idle mode.
Note: The PIN number is very important. If you lost the PIN number, you can’t
restore to the factory default setting.