User's Manual

080306A-1 19
/ button on the handset. The base unit IN USE LED Indicator will
flash.
2. Start your conversation.
3. To end your conversation, press the
button, the base IN USE LED
Indicator will light up steadily.
DIAL ONE OF 10 REDIAL NUMBERS
1. Press the DIALED CALLS button.
2. Press the
or button to scroll through to the previously called
numbers.
3. Press the
/ button. The selected number will be dialed
automatically.
LAST NUMBER REDIAL
A. AFTER HEARING A BUSY TONE WHEN PLACING A CALL
1. If you get a busy tone, press the handset
/ button to hang up.
2. Press the handset
/ button again and listen for a dial tone.
3. Press the handset RE/PA button. This will automatically redial the last
telephone number you called (up to 32 digits).
4. When finished with your call, press the
button or place the handset
on the base unit. The base IN USE LED indicator will light up steadily.
B. WHEN THE HANDSET IS OFF THE BASE UNIT AND IN IDLE
MODE
1. Press the
/ button on the handset and listen for a dial tone.
2. Press the RE/PA button. This will automatically redial the last telephone
number that you called (up to 32 digits).
3. When finished with your call, press the
button or place the handset
on the base unit. The base IN USE LED indicator will light up steadily.
PAUSE FUNCTION
• In some cases, such as PABX or long distance service, a pause may be
needed in the dialing sequence. Pressing the handset RE/PA button inserts
the programmed time interval between dialed numbers.