User's Manual

16 080306A-1
REGISTERING THE HANDSET (NOTE: Maximum of 5 handsets can be
linked to the same base unit; Maximum of 4 bases per handset)
You can purchase additional handsets (5 handsets can be registered) for use with
many of this telephone’s features. Make sure the battery is connected and the
base is powered on before starting the operation.
1. Press and hold the PAGE button on the base unit until the base IN USE
LED Indicator flash.
2. Press the MENU/OK button.
3. Press the
or button to select “ REGISTER”.
4. Press the MENU/OK button.
5. Press the telephone keypad button to select desired base number. The LCD
will show “SEARCHING NUMBER”.
6. When the handset has been successfully registered, the Pin code screen
will be displayed, pin number should be entered. The factory preset pin
number is “0000”. The tone will be sounded and the Base assigns a
number to the Handset.
NOTE: When you want to add a new extension handset, you must register the
new handset on the base unit.
INTERCOM FUCTION
1. In idle mode, press the INTERCOM button on the handset, and then enter
the handset number that you want to call. The internal called handset will
ring.
2. To answer the intercom call, press the
/ button on the called party
handset.
3. To end intercom mode, press the
button
Note: After the intercom call is established between two handsets, the third
handset can still make or answer a call to the external line.
CALL TRANSFER
You can transfer an external call from on handset to another handset.
1. During an external call, press the INTERCOM button and the
corresponding handset number that you want to transfer.