User's Manual

080306A-1 13

.....................

15/16

(100mm)

WALL USE:

Wall Mounting (Standard Wall Jack)

1. Install the wall mount bracket at the position as shown in Figure 3.

2. Connect the short telephone line cord to the TEL LINE jack.

3. Connect the opposite end of the telephone line cord to the modular wall

jack.

4. Align the wall mounting slots with studs located on the modular wall plate

and slide base down to lock in place.

Wall Mounting (No Standard Wall Jack)

1. Drill two holes with a vertical distance between the two marked positions

of 3

15/16”

（100mm）as shown in Figure 4.

Belt clip hook

(Figure 2)

(Figure 3)

Wall Mount Bracket

Wall Mount

Stud

Telephone

Modular Jack

Wall Mount

Stud