Daim Ntawv Qhia Tus Neeg Siv
Table Of Contents
- MSO/UPO2000 Series
- Copyright Information
- 1. Safety Requirements
- 2. Introduction of MSO/UPO2000 Series Digital Phosphor Oscilloscope
- 3. Getting Started Guide
- 3.1 General Inspection
- 3.2 Before Use
- (1) Connect to the Power Supply
- (2) Boot Check
- (3) Connect Probe
- (4) Function Check
- (5) Probe Compensation
- When the probe is connected to any input channel for the first time, this step might be adjusted in order to match the probe and the input channel. Probes that are not compensated may lead to measurement errors or mistake. Please follow the following ...
- 4. Front Panel
- 5. Rear Panel
- 6. User Interface
- 7. Touch Screen
- 8. Operation Menu
- 9. Remote Control
- 10. Troubleshooting
- 11. Appendix Contact Us
Quick Start Guide MSO/UPO2000 Series
2 / 18
Instruments.uni-trend.com
Copyright Information
Uni-Trend Technology (China) Co., Ltd. All rights reserved.
Trademark Information
UNI-T is the registered trademark of Uni-Trend Technology (China) Co., Ltd.
Document Version
MSO/UPO200020220624-V1.00
Statement
UNI-T products are protected by patent rights in China and foreign countries, including issued and
pending patents.
UNI-T reserves the rights to any product specification and pricing changes.
UNI-T reserves all rights. Licensed software products are properties of Uni-Trend and its subsidiaries
or suppliers, which are protected by national copyright laws and international treaty provisions.
Information in this manual supersedes all previously published versions.