Daim Ntawv Qhia Tus Neeg Siv
Table Of Contents
- MSO/UPO2000 Series
- Copyright Information
- 1. Safety Requirements
- 2. Introduction of MSO/UPO2000 Series Digital Phosphor Oscilloscope
- 3. Getting Started Guide
- 3.1 General Inspection
- 3.2 Before Use
- (1) Connect to the Power Supply
- (2) Boot Check
- (3) Connect Probe
- (4) Function Check
- (5) Probe Compensation
- When the probe is connected to any input channel for the first time, this step might be adjusted in order to match the probe and the input channel. Probes that are not compensated may lead to measurement errors or mistake. Please follow the following ...
- 4. Front Panel
- 5. Rear Panel
- 6. User Interface
- 7. Touch Screen
- 8. Operation Menu
- 9. Remote Control
- 10. Troubleshooting
- 11. Appendix Contact Us
Quick Start Guide MSO/UPO2000 Series
12 / 18
Instruments.uni-trend.com
6. User Interface
Figure 5 User Interface
Table 3 User Interface
No.
Description
No.
Description
1
Trigger status identification
9
System time
2
Time base scale
10
USB DEVICE icon
3
Sampling rate/storage depth
11
CH4 state icon
4
Waveform indicator
12
CH3 state icon
5
Waveform trigger position
13
CH2 state icon
6
Horizontal displacement
14
CH1 state icon
7
Trigger status
15
HOME menu
8
Operation menu
16
Analog channel icon and waveform
15
16
8
10
14
9
7
6
1
2
3
13
12
11
4
5