Specifications

33 34
35
38 39 40
The use of Relative Value and Relative
Percentage Value Mode
The and % mode applies to all measurement functions,
with auto ranging.REL mode can be used together with
AUTO-HOLD and MAX/MIN mode.
The definition is as follows:
Relative value ( )=present value - stored value.
For instance, if the stored value is 20.0V and the
present value is 22.0V, the reading would be 2.0V.
If a new measurement value is equal to the stored
value then display 0.0V.
Relative percentage value ( %) =(relative value
stored value) 100%
To enter or exit and % mode:
Use rotary switch to select the desired measurement
function before selecting REL . If measurement
functions change manually after REL is selected,
the Meter exits the REL mode.
Press REL to enter mode, and the present
measurement range is locked and display the last
measurement value as "0" as the stored value. Then
if carrying out measurement at this time, the LCD
will display the value as the result.
Press REL again to enter % mode, and the
present measurement range is locked and display
the last measurement value as "0" as the stored
value. Then if carrying out measurement at this time,
the LCD will display the value as the % result.
Press REL again or turn the rotary switch to reset
the stored value and exit and % mode, returning
to normal measurement mode.
Turning on the Display Backlight
32
C. Resistance, Conductance & Continuity Test
600Vp
(0.3%+60)
(0.3%+40)

(0.5%+20)
(2%+20)
(2%+120)
800.00Ω 0.01Ω
8.0000kΩ 0.1Ω
80.000kΩ 1Ω
800.00kΩ 10Ω
8.0000MΩ 100Ω
80.000MΩ 1kΩ
80.000nS 0.001nS
Continuity Test
0.01Ω
Remarks:
Continuity Test Range:
Buzzer beeps continuously.
Open circuit voltage approximate 0.7V.
At 800.00Ω~ 80.000MΩ Range:
Open circuit voltage approximate 0.7V.
Conductance Test (80.000nS):
80nS = 12.5MΩ
D. Capacitance
1.000nF 1pF
10.00nF 10pF
100.0nF 100pF
1.000 F 1nF
10.00 F 10nF
100.0 F 100nF
At the REL mode
600Vp
E. Diodes Test
Range Resolution Overload Protection
Diode 1mV 600 Vp
Remarks:
Open circuit voltage approximate 3V.
Displays approximate forward voltage drop reading.
F. DC Current
80.000mA
800.00mA
8.0000A
10.000A
1 A
10 A
100 A
1mA
80.000mA
800.00mA
8.0000A
10.000A
1 A
10 A
100 A
1mA
(0.2%+40)
(0.3%+40)
(0.5%+40)
(0.8%+40)
Remarks:
At 8A & 10A Range:
For continuous measurement 10 seconds and
interval time between 2 measurements greater
than 15 minutes.
G. AC Current
Remarks:
At 8A & 10A Range:
For continuous measurement 10 seconds and
interval time between 2 measurement greater than
15 minutes.
37
Overload
Protection
1000V
DC/AC
rms
continuous.
800.00mV
80
8.0000V
80.000V
800.00V
1000.0V
100 V
1mV
10mV
100mV
10 V
(0.8%+60)*
(0.8%+40)**
(0.8%+20)
50 ~ 60Hz
(1.5%+60)*
(1.5%+40)**
(1.5%+20)
40 ~ 50Hz
60 ~ 400Hz
Remarks:
Input impedance 10M .
Displays True RMS value.
Frequency response: 40 ~ 400Hz
* When input signal 8mV.
** When input signal 80mv.
1000V DC/AC
rms
scontinuous.
B. DC Voltage
80.000mV
800.00mV
8.0000V
80.000V
800.00V
1000.0V
1 V
10 V
100 V
1mV
10mV
100mV
(0.05%+40)
(0.05%+20)
(0.05%+20)
(0.05%+10)
Remarks:
At 80.00mV ~ 800.00mV Range:
Input impedance 4000M .
At 8.0000V ~ 1000.0V Range:
Input impedance 10M .
4
Frequency response 40Hz ~ 400Hz.
Displays True RMS value.
600Vp
2
6
600Vp
6
1A,250V fast type
glass fuse, 5x20mm.
10A,250V fast type
glass fuse, 5x20mm.
1A,250V fast type
glass fuse, 5x20mm.
10A,250V fast type
glass fuse, 5x20mm.
1A,250V fast type
glass fuse, 5x20mm.
10A,250V fast type
glass fuse, 5x20mm.
36
Maximum Voltage
between
Terminals and Grounding
5
5
41
80
This meter is suitable for indoor use.
:1A,250V fast type glass
fuse, 5x20mm.
:10A,250V fast type glass
fuse, 5x20mm.
CE Version: IEC61010
CAT III 1000V, CAT IV 600V
overvoltage and double
insulation standard.
/UL
UL Version:UL 61010B-1,
CAT II 1000V overvoltage
double insulation standard.