UTi165A Professional Thermal Imager P/N:110401108897X
UTi165A User Manual UTi165A User Manual Preface Thank you for purchasing the new UTi165A thermal imager. In order to use this product safely and correctly, please read this manual thoroughly, especially the Safety Instructions part. After reading this manual, it is recommended to keep the manual at an easily accessible place, preferably close to the device, for future reference.
UTi165A User Manual UTi165A User Manual 1.Safety Instructions Table of Contents 1. Safety Instructions ------------------------------------------- 4 2. Structure -------------------------------------------------------- 5 3. Display ---------------------------------------------------------- 6 4. Power On/Off -------------------------------------------------- 6 5. Menu Introduction -------------------------------------------- 7 6. Operating Instructions --------------------------------------- 8 7.
UTi165A User Manual 2. Structure UTi165A User Manual 3. Display Display size: 2.
UTi165A User Manual UTi165A User Manual 6.Operating Instructions 5. Menu Introduction 6.1 Temperature Unit Selection 1. Press the SET button to open the main menu. 2. Press the left/right button to select the option. 3. Press the SET button to enter the temperature unit submenu. 4. Press the up/down button to select °C or °F. 5. Press the back button to exit the current menu. Thermal imaging page 6.
UTi165A User Manual To track center point: 1. Press the SET button to open the main menu. 2. Press the left/right button to select the option. 3. Press the SET button to enter the cursor submenu. 4. Press the up/down button to select the option. 5. Press the SET button to confirm. 6. The center point marker is turned on. 7. Press the back button to exit the current menu. UTi165A User Manual 1. Press the SET button to open the main menu. 2. Press the left/right button to select the option. 3.
UTi165A User Manual 6.5 Settings To enter Settings menu: 1. Press the SET button to open the main menu. 2. Press the left/right button to select the option. 3. Press the SET button to confirm. 6.5.1 Language UTi165A User Manual 6.5.2 Date & Time To set date & time: 1. Select the Date & Time option (up/down button) in the settings menu. 2. Press the SET button to enter the Date & Time submenu. 3. Press the left/right button to select the parameter to be adjusted. 4.
UTi165A User Manual Note: Selecting correct emissivity is very important for accuracy of temperature measurement, as emissivity has a significant impact on the measured surface temperature. UTi165A User Manual 6.5.6 Temperature Bar For emissivity values of common materials, please refer to the common emissivity table in the appendix. 6.5.4 Auto Power Off To set auto power off: 1. Select the Auto Power Off option (up/down button) in the settings menu. 2.
UTi165A User Manual UTi165A User Manual 6.5.10 Format SD Card 6.5.8 Device Information 165A To view the device information: 1. Select the Device Info option (up/down button) in the settings menu. 2. Press the SET button to view the detail information of the device. 3. Press the back button to exit the current menu. 6.5.9 Factory Reset To format SD card: 1. Select the Format SD option (up/down button) in the settings menu. 2. Press the SET button to enter the Format SD submenu. 3.
UTi165A User Manual UTi165A User Manual 7.USB Communication 1. Download and install the PC software (refer to UNI-T Documents Download Operation Guide). 2. Connect the USB cable to the PC. 3. Users can browse pictures and analyze data through the PC software. Regarding its usage, retrieve the Software User Manual from the Help option of the operation interface. 8. Specifications General parameters PC software Yes Data transmission Type-C USB interface Product size (L x W x H) 236mm x 75.
UTi165A User Manual UTi165A User Manual 10. Appendix Emissivity of common objects Material Emissivity Material Emissivity Wood 0.85 Black paper 0.86 Water 0.96 Polycarbonate 0.8 Brick 0.75 Concrete 0.97 Stainless steel 0.14 Copper oxide 0.78 Tape 0.96 Cast iron 0.81 Adhesive tape 0.09 Rust 0.8 Copper plate 0.06 Gypsum 0.75 Dark aluminum 0.95 Paint 0.9 Human skin 0.98 Rubber 0.95 Asphalt 0.96 Soil 0.93 PVC material 0.