User Manual

Set period of pulse train and recurring number of waveform
Press soft function key RETURN to return to the interface below after selecting waveform
of pulse train and relevant parameters:
Figure 4- 55 Set pulse train parameters
You can set with multi-functional knob and direction key. You can also press corresponding
soft keys of parameters again, when the interface below will pop up. To set some parameter,
press corresponding soft key, input the required value and select the unit.
Enable channel output
Press CH1 button start channel 1 output quickly. Or enable output by pressing Utility and
then CH1 Setting . After channel output is opened, backlight of CH1 button is on, and on
the right side of channel information label, the font “OFF” changes to “Ncyc”, meaning open
channel output.
Figure 4- 56 Set period of pulse train
Figure 4- 57 Use channel output
91