User Manual

c)Frequency Sweep Mode
For linear frequency sweep, waveform generator changes output frequency in a linear way
during frequency sweep; for logarithmic frequency sweep, waveform generator changes
output frequency in a logarithmic way. Linear frequency sweep mode is default. To change
it, please press soft key Type → Log on the interface for starting frequency sweep mode
(please press Return first to enter the interface for selecting frequency sweep waveform).
Figure 4- 35 Select logarithmic frequency sweep
d)Frequency Sweep Time
Set the time from starting frequency to stop frequency, which is 1s by default and in the
range of 1ms~500s. To change it, you can use multi-functional knob and direction key on
the interface for selecting frequency sweep mode or press soft function key
Param → SweepTime , input number through numeric keyboard and press corresponding
soft key of unit.
Figure 4- 36 Set frequency sweep time
78