User Manual

You can set with multi-functional knob and direction key. You can also press corresponding
soft keys of function again, when the interface below will pop up. To set some parameter,
press corresponding soft key, input the required value and select the unit.
Figure 4- 26 Set rising edge
4)Set duty ratio deviation
Press Return to return to the interface below to set frequency deviation after setting carrier
parameters.
Figure 4- 27 Set modulation parameters
You can set with multi-functional knob and direction key. You can also press soft function
key Param → DutyDev again, input the number 40 through numeric keyboard and press
soft key % to set duty ratio deviation.
74
Figure 4-28 Set duty ratio deviation