User Manual

Enable Channel Output

Press CH1 button start channel 1 output quickly. Or enable output by pressing Utility and

then CH1 Setting. After channel output is opened, backlight of CH1 button is on, and on

the right side of channel information label, the font “OFF” changes to “ASK”, meaning open

channel output.

The shape of ASK modulation waveform checked through oscilloscope is shown as following:

e)Frequency Shift Keying (FSK)

In frequency shift keying, rate of carrier wave frequency and hopping frequency can be changed.

FSK Modulation Selection

Press Menu → Mod → Type → FSK in turn to start the FSK function. The device will output

modulated waveform with current setting.