User Manual

UTG2122B UTG2082B UTG2062B
1µHz
1Hzµ
1Hzµ
1Hzµ
1Hzµ
120MHz
30MHz
5MHz
30MHz
25MHz
1Hzµ
1Hzµ
1Hzµ
1Hzµ
1Hzµ
80MHz
30MHz
4MHz
25MHz
20MHz
1Hzµ
1Hzµ
1Hzµ
1Hzµ
1Hzµ
60MHz
30MHz
3MHz
20MHz
15MHz
Minimum
Value
Minimum
Value
Minimum
Value
Maximum
Value
Maximum
Value
Maximum
Value
Frequency
Carrier Wave
Sine wave
Square wave
Ramp wave
Impulse wave
Arbitrary wave
Modulation Source Selection
Both internal and external modulation source are compatible. After enabling AM function,
the default modulation source is internal. If need to change press
Param → Source → External .
1)Internal Source
Modulation wave can be: sine wave(default), square wave, rising ramp wave, falling ramp
wave, arbitrary wave and noise. If need to change the waveform, press Param → ModWave .
Square wave: duty ratio is 50%
Rising Ramp Wave: symmetry degree is 100%
Falling Ramp Wave: symmetry degree is 0%
Arbitrary Wave: when arbitrary wave is modulated waveform, DDS function generator
limits arbitrary wave length as 4kpts
Noise: White Gauss noise
17