Product specifications

Operating Manual for UTD2000/3000

comparison without waveform overlapping for the

first and second channels.

following figure)

2. To measure delay of sine signal caused by circuit

then observe waveform variation.

① Delay of automatic measurement channel

To press MEASURE button to display automatic

measurement menu;

To press F1 key to enter into measurement menu

category for selection;

To press F4 key to enter into time measurement

Figure 3-2: Waveform delay

parameter list;

To press F5 key twice to enter into 3/3 page;

To press F2 key to select delay measurement;

To press F1 key to select CH1 then press F2 key to

select CH2 then press F5 as enter key

You can see delay value from “CH1-CH2 delay” in F1

area.

② Observation of waveform variation (shown in