Product specifications

RUN/STOP: To acquire waveform or stop
acquisition continuously;
The key can be pressed for switchover of waveform
sampling between operation and stop. User can press
the key under operation status so that green lamp is
on. “Auto” can be displayed in upper part of the
screen. Old digital storage oscillograph can acquire
waveform continuously while red lamp is on by
pressing the key under stop status. Digital storage
oscillograph can stop acquisition when displaying
“Stop” in upper part of the screen.
Operating Manual for UTD2000/3000
71
Function
Setup
Obtainment mode
Sampling
Display format
Set to YT
Horizontal position
Automatic adjustment
Adjustment according to signal
frequency
Second/grid
Trigger coupling
AC
Hold off
The minimum value
Trigger level
Set to 50%
Automatic
Trigger mode
Trigger source
Set to CH1; Set to CH2 when
exerting on signal for it if there
is no signal for CH1;
Trigger gradient
Ascending
Trigger type
Edge
All
Vertical band width
Volt/grid
Adjustment according to signal
amplitude