Product specifications

User can move cursor for measurement under
CURSOR mode. There are 3 modes, namely, voltage,
time and tracing. △V can be measured by pressing
SELECT and COARSE keys on the panel and multi-
purpose knob controller to adjust positions of 2
cursors respectively during voltage measurement.
Similarly, it can be measured if selecting time. Cursor
of digital storage oscillograph can also trace signal
variation automatically under tracing mode with
waveform display.
Remark: For 5.7-inch oscillograph
alter according to rotation speed.
1. Voltage/time measurement mode: The first or
secondcursor will appear at the same time. Cursor
position on the screen can be adjusted by multi-
purpose knob controller. User can press SELECT key
(or multi-function knob key) to select cursor to adjust.
Displayed reading is also time or voltage between 2
cursors.
2. Tracing mode: Horizontal and vertical cursors can
intersect to become a crossing cursor. Crossing cursor
can position on the waveform automatically to adjust
1. Effect of SELECT key is to select the cursor.
horizontal position of crossing cursor on the
2. Effect of COARSE key is to adjust movement
waveform by rotating multi-purpose knob controller.
speed of cursor.
Digital storage oscillograph can also display
For 7-inch oscillograph:
coordinate of cursor point at the same time.
3. Measurement value will be displayed in upper
User can press multi-function knob key to select
right corner of the screen automatically when
the cursor. Movement speed of cursor can also
opening cursor function.
Operating Manual for UTD2000/3000
69