Product specifications

Automatic measurement of time parameters ascending edge to ascending edge;

Delay (descending edge): It refers to delay from

UTD2000/3000 series oscillograph can measure

descending edge to descending edge;

signal frequency, cycle, ascending time,

Positive duty cycle (+Duty): It refers to ratio of

descending time, positive pulse width, negative

positive pulse width and cycle;

pulse width, delay (of 9 combinations), positive

Negative duty cycle (-Duty): It refers to ratio of

duty cycle, negative duty cycle and 10 time

negative pulse width and cycle;

parameters automatically. Definitions of such

Measurement menu

time parameters are as follows:

Operation Description: Please press MEASURE key

RiseTime: It refers to period when waveform

so that the screen can display 5 measurement values.

amplitude increases from 10% to 90%;

As shown in Form 2-25, user can press any key of F1

FallTime: It refers to period when waveform

to F5 so that the screen enters into measurement

amplitude decreases from 90% to 10%;

selection menu.

Positive pulse width (+Width): It refers to pulse width

of positive pulse under 50% of amplitude;

Negative pulse width (-Width): It refers to pulse width

of negative pulse under 50% of amplitude;

Delay (ascending edge): It refers to delay from

Operating Manual for UTD2000/3000