Product specifications

60
Automatic measurement
As shown in following figure, MEASURE is
automatic measurement function key. You can be
familiar with powerful automatic measurement
function of UTD2000/3000 series digital storage
oscillograph gradually by following introduction.
Application example
Measurement menu of such series of oscillograph
can be used to measure 28 kinds of waveform
parameters. User can press MEASURE key Enter
into parameter measurement display menu firstly.
The menu includes 5 areas to display
measurement value at the same time. They
correspond to function keys of F1 to F5
respectively. Please press corresponding F keys
Enter into measurement category selection menu
if measurement category shall be selected for any
area. Measurement category selection menu can
be classified into voltage and time kinds Enter
into voltage or time measurement category
respectively. Please press F1 to F5 to select
measurement category then return to parameter
measurement display menu. In addition,user can
Operating Manual for UTD2000/3000
Figure 2-28 Function key (automatic measurement)
of sampling system