Product specifications

Operating Manual for UTD2000/3000
31
Setup of trigger system Trigger level: Trigger level will set signal voltage
Trigger can determine data acquisition time and which corresponds to trigger point.
waveform display for digital storage oscillograph. It 50%: To set trigger level to vertical point of trigger
can convert instable display to meaningful signal amplitude.
waveform once correct setup. Digital storage FORCE: To produce 1 trigger signal forcefully for
oscillograph will collect sufficient data to map mainly application for normal and single modes
waveform in the left side of trigger point firstly. It shown in trigger modes.
will acquire data continuously and synchronously TRIG MENU: To trigger and set menu key.
when waiting for trigger conditions. It also will
acquire sufficient data continuously to map
waveform in the right side of trigger point. Trigger
control area of operation panel of digital storage
oscillograph includes trigger level adjustment knob
and trigger menu key of [TRIG MENU];
5.7-inch oscillograph will set 50% of trigger level in
vertical middle point of signal (and realize
UTD2000L by press [SET TO ZERO] key). It has to
press forced trigger key of [FORCE].