Product specifications

Operating Manual for UTD2000/3000

Chapter 2: Instrument Setup

■ Set trigger systems of [TRIGGER LEVEL],

[MENU], ]50%] and] FORCE];

By now, you have been familiar with operation of

■ Set sampling mode of [ACQUIRE];

vertical control area, horizontal control area and

■

trigger system menu for UTD2000/3000 series digital

■

storage oscillograph preliminarily. You should be

■

familiar with setup of digital storage oscillograph by

■

menu operation by introduction shown in previous

■

chapter. It is suggested to read Chapter 1 if you have

■

not been familiar with above operation and methods.

The chapter is mainly to introduce following

It is suggested to read the chapter carefully to know

themes：

many measurement functions for UTD2000/3000 and

■

system operation method.

■

[HORIZONTAL SCALE];

Set display mode of [DISPLAY];

Store and call-out for [STORAGE];

Set auxiliary system of [UTILITY];

Automatic measurement of [MEASURE];

Cursor measurement of [CURSOR];

Use execution buttons of [AUTO] and

[RUN/STOP];

Set vertical systems of [CH1], ]CH2],] MATH],

]REF] , ]OFF] ]VERTICAL POSITION] and

]VERTICAL SCALE];

Set horizontal systems of ]MENU] or ]HOR

MENU], ]HORIZONTAL POSITION] or