Product specifications

Operating Manual for UTD2000/3000

1. Use horizontal SCALE knob to alter horizontal

time base gear then observe alternation of status

information. To rotate horizontal SCALE knob to

alter “s/div” time base gear so as to show

corresponding variation of time base gear display for

corresponding channels of status bar. Horizontal

scanning speed steps from 2ns/div～50s/div by way

of 1－2－5 mode.

﹡Note: Horizontal scanning time base gear varies

for UTD2000/3000 series digital storage oscillograph

due to different models.

trigger displacement.

3. Please press [MENU] button for 5.7-inch

oscillograph (and press [HORI MENU] button for 7-

inch oscillograph) to display Zoom menu. Please

press [F3] to open view window extension under this

menu then press [F1] to close view window extension

and return to main time base. Hold off time can be set

under this menu.

2. Use horizontal POSITION knob to adjust

horizontal position of signals in waveform window.

To use horizontal POSITION knob to control trigger

displacement of signals. Horizontal movement of

waveform with knob can be observed when rotating

horizontal POSITION knob for application for