Product specifications

Appendix C: Maintenance and cleaning any corrosive chemical detergent to avoid damage to
General maintenance instrument or probe.
It is not allowed to store or place instruments in Warning: Please confirm that instrument has been
locations with direct sunshine for LCD for a long dried thoroughly before power re-supply to avoid
time. Note: It is not allowed to touch instrument or electric short-circuit even personal injury due to
probe by pressurized spray, liquid or solvent to avoid moisture.
damage.
Cleaning:
Instrument and probe can be inspected constantly
according to operation.
Please clean outer surface of instruments according to
following steps:
1. Please remove floating dust out of instrument and
probe by soft cloth. Please do not scratch transparent
LCD protection screen during cleaning.
2. Please power off when cleaning the instrument by
wet soft cloth without dripping. It can be cleaned by
soft detergent or clean water. It is not allowed to use
105
Operating Manual for UTD2000/3000