User Manual

90
UTD1000L
User Manual
Table 6-18
You need to run this operation to avoid any measurement error arising from environment
change To ensure an accurate calibration please power on the Oscilloscope and warm it up for
minutes
The Oscilloscope can automatically adjust its ranges based on the input signal to present
users optimal waveform without any manual interference.
Key Points
Self-Calibration:
Full Autoset
:
. , 20
.
:
Function menu
Function menu
Model UTD1000CL
Model UTD1000CL
Self
-
Calibr
Self
-
Calibr
Default
Default
Freq Counter
DC Autoset
Clear
Clear
Settings
Settings
------
------
------
------
------
------
On/Off
On/Off
Description
Description
The Oscilloscope will calibrate the system automatically.
The Oscilloscope will calibrate the system automatically.
The Oscilloscope returns to factory default status.
The Oscilloscope returns to factory default status.
Turn on /off trigger frequency counter.
Turn on/off DC signal self-identification function
Clear saved or recorded waveforms or settings in the Oscilloscope, etc
;
Clear saved or recorded waveforms or settings in the Oscilloscope, etc
;