User Manual

8
5
Case 1 To save and recall channel waveforms
to the internal channel:
1. Press SHIFT and shift icon shows on upper
right part of screen
2. Press STORAGE to access storage menu
3. Press F1 to set Type to Waveform
4. Press Left&Rightbuttons to set Location to 1
press F3 to select target Source Only
available in UTD1000DL
5. Press F3 of UTD1000CL to save and also
F3 button for UTD1000DL then storage
success shows on the display , indicating the
waveform has been successfully saved into the
Oscilloscope
6.Press SHIFT shift icon shows on upper right
part of display.
7.Press REF to access waveform recall m
enu
8.Press F1 of UTD1000DL to select between
REFA or REFB UTD1000CL defaults at
REFA
9.Press Left &Right arrow buttons to set
Location to 1
10 Press F3 to recall, Load Success will
show to indicate the waveform has been
successfully displayed on the screen too
11 Press F4 to turn off the current reference
waveform.
:
;
;
;
;
; (
)
,
, “
”
;
,
;
;
;
;
. “ ”
;
.
Saving Waveforms
Recalling Waveform
UTD1000L
User Manual