User Manual

8
3
4 Press F1 to set to Save option
5 Use Arrow Buttons to set the location to 1
6 Press F3 to save the recorded waveform,
Saving shows on the screen When
Saving icon disappears it indicates the
waveforms have already been saved into internal
memory.
Model UTD1000CL can record up to 300
screens of waveforms and it is up to 150 for Model
UTD1000DL If following operations are performed
during recording the recording will stop
Press RUNSTOP/SINGLE button
■ Press AUTO or SHIFT+AUTO button
■ Turn Timebase range to access SCAN mode.
Case 2: To recall recorded waveform in Case
from the internal memory and rep
lay it do the
following
1 Press RECORD to access record menu
2 Press F1 to set to Save option
3 Press Arrow Buttons to set Location to 1
4 Press F4 to begin recalling, loading
indicates on the screen after the loading
finishes Load Success indicates
5 Press F1 to set to Record option
6 Press F2 button to begin playing the recalled
waveforms automatically, press F3 to stop or use
Arrow Buttons to select the waveform to be played.
Figure 6-24 Replay Waveform Record
To store the waveforms, do the following:
1. Press SHIFT button, and shift icon shows on
upper right part of screen
2. Press STORAGE button to a
ccess storage
menu
. ;
. ;
.
“ …” .
“ …” ,
:
,
.
, .
;
1
,
:
. ;
. ;
.
. “ …”
,
, “ ” .
. ;
.
;
;
Note
Storage
■
UTD1000L
User Manual