User Manual

80
The time parameters the Oscilloscope can
automatically measure contain:
The time required to rise from 10%
to 90% of waveform amplitude
The time required to fall from 90% to
10% of waveform amplitude
The distance between the mid 50% amplitude
points of a positive pulse
Negative Pulse Width ( Width
The distance between the mid (50%) amplitude
points of a negative pulse
The delay time between rising
edges from A to B
The delay time between falling
edges from A to B
the ratio of
positive pulse width to the period
the ratio of
negative pulse width to the period
Press RECORD button to open waveform
recor
d menu There are two independent menus
shown as below
Figure 6-22 Waveform Record Menu
RiseTime
FallTime
Positive Pulse Width ( Width
Rising Delay:
Falling Delay:
Positive Duty Cycle ( Duty
Negative Duty Cycle ( Duty
Recording
:
.
:
.
+ ):
( )
.
- ):
.
+ ):
.
- ):
.
.
:
Recording and Storage
UTD1000L
User Manual