User Manual

79
Base Value (Vbase
Middle Value (Vmid)
Peak-to-Peak Value (Vpp
Amplitude (Vamp
Overshoot:
Preshoot
Average Value
RMS Value (Vrms
):
:
):
):
( - )/
:(
:
):
Voltage measured from the
base of the waveform to the ground
a half of amplitude value
Voltage measured
from the highest point to the lowest point of
waveform
Votage measured from the
top to the base of the waveform
Maxi Top Amplitudex100%
Min-Low)/Amplitudex100%
The arithmetic mean over one
cycle in the waveform
Effective value, the root mean
square voltage over one cycle in AC signal
waveform that corresponds toDC voltage with
equal generated energy calculated in this cycle.
Figure 6-21 Time Measurement
UTD1000L
User Manual