User Manual

72
UTD1000L
User Manual
Term Explanation
Normal Mode:
Peak Detect:
AVG Mode:
Fast Acquisition:
.
.
.
. .
.
,
-
.
，
The Oscilloscope samples the
signals at equal time interval to create the
waveform on the display.
Under this mode, the Oscilloscope
uses Max. and Min. values detected in each sampling
interval to form waveform on the display It is
suitable to capture and display narrow pulse which
may probably be neglected if using Normal mode
However the noise under Peak Detect sounds
louder
The Oscilloscope captures certain
numbers of waveforms and calculates their average
values that will be used to form waveforms on
the display This mode can reduce random noise
it only acquires points for Min
memory dep
th required for display which can
shorten the hold off time between each
acquisition and realize superb capture rate It can
significantly increase the possibility to find out rarely
seen issue.
Press DISPLAY button to access display menu,
please refer to the follow table:
Figure 6-14 Waveform Display Setup
Setting the Display