User Manual

Table 6-7
UTD1000L
User Manual
69
Menu
Type
Slope Type
Qualifier
Next
Slew Rate
Threshold
Back
Settings
Slope
﹤
Rise
Fall
Description
Set trigger
Type to Slope
Trigger on rising edge that traverse between thresholds
Trigger on falling edge between thresholds
.
Trigger When the slope is greater than the set value of slew rate.
Trigger When the slope is less than
Trigger When the slope equals to the set value of slew rate.
.
the set value of slew rate
Page 2 of Slope Menu
To set up slew rate value, use Left and Right arrow buttons to
pulse width time when the menu is displayed.
Use Up and Down buttons to move low-level threshold
Use Up and Down buttons to move High-level threshold
Use Up and Down buttons to move low-and high-level thresholds.
To return to Page 1 of Slope Menu.
=
Low
High
Low&High
﹥