User Manual

UTD1000L
User Manual
56
Set Probe Factor UTD1000DL Channel Setup
To match with the probe factor on the probe,
you need to set up corresponding factor in channel
menu. For example, the probe factor is 10:1
please set Probe option in the menu to 10
Do the same setting for other selected probe
factor in order to ensure accurate voltage
reading
Under channel menu, press F3 under channel
menu to set up probe factor
Probe Attenuation Factor VS Menu Option, see
following table:
Table 6 2A
The channels have their own setup menus.
Repeat pressing CHANNEL to toggle between
CH1 and CH2 menus and display corresponding
menu options as shown below:
Figure 6-1B Channel Menu Se
tup
,
×.
.
.
-
Probe Attenuation
Factor
1:1
10:1
100:1
1000:1
Menu Option
1
×
1
×
0
100
×
1000
×